Things To Do With A Microwave Magnetron (Simple Guideline)
Remember when Sheldon from ‘The Big Bang Theory` started to make his own nuclear reactor out of smoke detectors? Well, it didn’t end well and everything got confiscated. This is due to the hazardous nature of americium.
Well, that shouldn’t stop your DIY mind, right? With protection and the right equipment, you can do wonders. Even with your simple dead microwave. If you have a working magnetron, you can do a lot with it. But what are the things to do with a microwave magnetron?
You can build a 2.4Hz ATV transmitter, which is very hazardous and requires a lot of knowledge. Without the proper idea about it, you might end up seriously damaging yourself. This is why we are going to go the safest route and walk you through 2 things you can do with the magnetron.
- A fishing rig.
- A knife holder.
Don’t worry, we will guide you through how to extract the magnets and everything today. We can’t let you go on your own.
2 Things To Do With A Microwave Magnetron | Diy At Its Best
We are going to guide you through the steps of retracting the magnets from the magnetron. Make sure you wear gloves and glasses as there is beryllium oxide inside them. Which is highly toxic. You can also wear a mask so you don’t inhale it in any way. And then proceed with the steps of creating any of the two things.
A Fishing Rig Out Of Microwave Magnetrons
A lot of us like fishing for valuables in the lake or the river. It’s a cool hobby and you find a lot of things. And sometimes you even stumble upon lost and found objects. But you do need a powerful magnet for that. This is where the magnetron from your dead microwave comes in.
You can easily turn it into a powerful fishing rig, as you cannot open it and cause yourself harm, but use it for something even better.
Step 1: Gathering And Starting
Gather the things you will need. This includes the magnetron from your microwave, a drill, some rope, and an eyebolt. Then proceed to remove the magnets from the magnetron.
Step 2: Remove The Magnetrons
Proceed to remove the magnetrons, Remember, it has toxic chemicals inside, so wear protective gloves. Use a screwdriver to remove the screws on the microwave to retract the magnetron. And unscrew the magnets from the magnetron the same way. You might need a flat head to pry out them. Don’t poke too much or you might damage the magnets.
Step 3: Drill In The Magnet
After you get the magnets, drill some holes. You have to go slow on them so you don’t damage their power. And when it is done, install the eyebolt on the magnets.
Step 4: Thread Some Rope Through The Eyebolt
Feed some rope through the eye bolt. And tie a knot so it doesn’t move around. You can attach some weights if you want so it gets submerged in the water. And extend the rope to your liking.
Step 5: Start Fishing
When everything is in place, get on the boat and head out to the river to test your masterpiece. Even though little, you will find at least a few fishing hooks. And that will tell your project is a success.
Creating A Knife Holder Out Of Magnetrons
Another cool and useful thing you can do with the magnetron is create a knife holder. Every kitchen needs it, and it looks extra cool hanging them out of thin air! Lot more professional, right?
To do that, you will have to go with almost the same process of creating a fishing rig, but a bit differently. Pry out the magnets from the magnetron the way we described and move on to the process.
Step 1: The Things To Gather
Gathering the things is half the work done. Get your magnets, wood plank, or the piece of wood you want as the frame, drill machine, screws and some screw anchors ready.
Step 2: Cut The Wood And Drill Holes
Cut the wood to the size you want. It will depend on how many knives you want to hang on the wall. And then drill some holes for the magnets into the wood. And don’t forget the ones to hang on the wall.
Step 3: Screw The Magnets
When the holes are drilled, place the magnets and secure them with screws. You can also use adhesive, but screws are better.
Step 4: Put It Up on The Wall
When everything is done, test it by placing a knife on the wood panel. If it is good, start installing it on the wall. Secure it with screws and anchors. And you have your own DIY knife holder. Talk about professional chef vibes!
People Also Asked
What can be done with a magnetron?
You can create cool tools like fishing rigs, or knife holders. If you know your way around, you can also 2.4Ghz ATV transmitter or a spot welder. And diamonds? Yes, you can create diamonds too, but it will require a lot more tools.
What can I make out of the old microwave?
You can turn your old microwave parts and create a lot of cool things. An AC arc welder is the most common use. But if you are not keen on creating something like that, you can use the magnets to create fishing rigs, knife holders, and other cool stuff.
Conclusion
Safety should be your number one priority. You can do a lot with the microwave magnetron. But as most of them require a lot of knowledge and safety precautions, we just mentioned the easier ones. We will come up with the harder ones later on.
