Whirlpool Mini Fridge Flashing HH? Easy Solution
Most modern fridges come with a display that shows important data regarding them including current temperature, time, and settings. This display also has a portion where the fridge error codes flash when any relevant error occurs. In terms of Whirlpool fridges, there are almost 20 error codes that represent 20 different errors of the fridges. The HH code is considered an unusual error code and it most likely resembles the HRS code which indicates high refrigerator temperature.
Why the Whirlpool Mini Fridge Flashing HH?
No electronic devices are entirely error-proof and fridges aren’t any exception. Fridges tend to face any problem at least once in their lifespan. That’s why the most possible problems that a fridge may face are allocated with error codes so that the users can easily find out what’s wrong with their fridge. These error codes regard errors ranging from power loss to defrost failure.
In terms of the HH code, mainly it means the internal temperature of the fridge gets high enough that the thermometer even can’t detect the actual temperature. There are some particular ways that can make the fridge’s temperature high. For example – the fridge’s probe bottle is faulty, the evaporator motor fan may get too hot, maybe the condenser coils are defective or dirty, the compressor becomes faulty, etc. It’s also possible that you’ve stored food that’s warm, making the refrigerator compartment temperature also warm, which ultimately causes this HH flashing.
How to Stop Your Whirlpool Mini Fridge From Flashing HH?
As the HH code is flashing because of the high temperature in the refrigerator compartment, it means you need to take the necessary steps to make the temperature cool enough to store food and stop the flashing. Based on the causes, the troubleshooting may be different. But the ultimate solution is to make sure no fridge component can provoke the internal temperature to get warm.
1. Check the components that are directly or indirectly related to cooling down the temperature. For example – the probe bottle is used to get the fridge’s temperature. If it becomes faulty then it can’t determine the actual temperature and may provide a value that can be of a high temperature and cause this HH flashing. Check for the probe and if you find it faulty, just replace it.
2. The evaporator fan motor works to regulate the air through the refrigerator compartment to ensure a cool temperature. If it gets too hot then its efficiency gets diminished. Therefore, it can’t help to cool down the compartment and as a result, HH flashes. So, ensure that it’s okay and not in hot condition.
3. The condenser coils hold the heat of the hot refrigerant and then remove it, which ultimately helps the compartment to stay appropriately cold. Now, if the condenser coils face dust or dirt accumulation, it makes the coils less effective. So, overall it affects the refrigerator compartment and makes it warmer than usual. In this case, keep the condenser coils clean.
Finally, the compressor makes sure that the refrigerant can circulate throughout the cooling system and keep the compartment cool as it should. If the compressor becomes defective, it’ll stop operating. Therefore, the refrigerant won’t pass through the system and the refrigerator compartment won’t get the element that makes it cool. Eventually, the compartment will be warm and make the fridge display flash HH code. Check for the compressor. If you find the compressor is defective, replace it with a new one.
Conclusion
That’s all about the matter where the Whirlpool mini fridge is flashing HH. In this case, you must check for the exact reason or cause in your case. So, find out the cause and then do the necessary according to it. If you successfully do the overall troubleshooting, there won’t be any more flashing at all. Feel free to share your feedback and let us know what you think of this post.
